Cable Connections
Connecting to Power, Audio, and External Devices
If PoE is not available, the camera may be powered through the auxiliary power cable using either 12 V DC or
24 V AC. The power consumption information is listed in the product specifications.
To power the camera, connect the two power wires to the brown and blue auxiliary power wires. The
connection can be made with either polarity.
WARNING —
This product is intended to be supplied by a UL Listed Power Unit marked “Class 2” or
“LPS” or “Limited Power Source” with output rated:
l
With IR LEDs: 24 V AC ± 10%, 74 VA minimum, or 24 V DC ± 10%, 52 W minimum, or a Microsemi
PD9601G/AC (90 W) or Microsemi PD9501GR/AC (60 W) Power over Ethernet mid-span injector.
l
Without IR LEDs: 24 V AC ± 10%, 37 VA minimum, or 24 V DC ± 10%, 26 W minimum, or PoE+
IEEE802.3at Type 2 compliant Power Sourcing Equipment (PSE) rated 50-57 V DC, 25.5 W
minimum.
Pigtail Connector and Wires
Power supplies, audio devices, and external devices are connected to the camera through the power, audio,
and I/O pigtail. The following diagram and table shows the I/O, audio, and power pigtail connector and wires:
Wire
Color
Description
1
Blue
AUX1 Power, accepts either polarity
2
Brown
AUX2 Power, accepts either polarity
3
White
Audio IN
4
Yellow
Audio GND
5
Green
Audio OUT
6
Purple
Relay OUT
7
Gray
Relay GND
8
Pink
Relay IN
Cable Connections
59
