Accessing the Live Video Stream
Live video stream can be viewed using one of the following methods:
l
The mobile web interface using the USB Wifi Adapter. For more information, see
(Optional) Using the USB
Wi-Fi Adapter
on the previous page.
l
Web browser interface: http://
< camera IP address>/
.
l
Network Video Management software application (for example, the AvigilonControl Center software).
NOTE:
The default device username is
administrator
with no password.
NOTE:
You will be unable to connect an H4 Multisensor camera to ACC software version 6.12 or older if any of
the H4 Multisensor heads have their
Format
set to
H.265
on the Compression and Image Rate page of the
camera's web interface. To connect an H4 Multisensor camera to an ACC system, be sure to set the
Format
to
H.264
or to upgrade the ACC software to v6.12.2 or later.
Installing the H4 Multisensor Camera Base to an In-Ceiling Mount
After the cable connections have been made, mount the H4 Multisensor camera base into the in-ceiling mount
adapter.
1. (Recommended) Attach a safety lanyard from the in-ceiling mount adapter to the lanyard anchor on the
camera base to prevent the camera from falling. See
Connecting Cables
on page 51.
2. Push the camera module into the in-ceiling mounting adapter so that the 3 setscrews pass through the 3
slots (a). In one smooth motion, push the camera module up through the 3 slots (a), twist clockwise (b), and
push up again so the 3 setscrews are positioned at the 3 screw holes (c).
3. Use a screwdriver to turn the 3 setscrews clockwise by 90° and secure the camera into the in-ceiling
mount adapter (d).
Accessing the Live Video Stream
55
