Avigilon 10.0TB-HD-NVR, Installation Manual

Page: 8 / 133

4
English
Installing the Rack Rails and Cable
Management Arm
If the server will be kept in a server rack, install the Rack Sliding
Rails and the Cable Management Arm provided in the server
package. Follow the procedures outlined in the
Rack Installation
Instructions and the CMA Installation Instructions provided in the
assembly kits.
The included mounting rails are designed for racks with square
holes. If you require rails for round hole racks (HD-NVR-RAILS-
RND), contact your local Avigilon Sales Representative.
Connecting Cables
Refer to the server diagrams in the Overview section for the
location of the different connectors.
1. Connect the keyboard and mouse to an available USB
connector on either the front or the back of the server.
2. Connect a monitor to the video connector on the front of the
server.
3. Connect the server to your network using an Ethernet
network cable.
4. Connect the power cable to the power supply at the back of
the server.
5. If you are also installing an Avigilon HD NVR Storage
Expansion with your server, connect the server to the
storage expansion. See
Connecting Storage Expansions
on page 10 for more information.
6. Press the power button on the front of the server. Check
that the server LED indicators display the correct status.
See
LED Indicators on page 14 for more information.
Installing the Bezel
The bezel can be installed on the front of the server to help protect
the power button and hard drives against unauthorized access.