Resetting to Factory Default Settings
If the camera no longer functions as expected, you can choose to reset the camera to its factory default settings.
Use the firmware revert button to reset the camera. The firmware revert button is shown in the following
diagram:
NOTE:
Be careful not to scratch the dome bubble.
Figure 5:
The firmware revert button between the status LEDs.
1. Ensure the camera is powered on.
2. Remove the dome cover.
3. Using a straightened paperclip or similar tool, gently press and hold the firmware revert button for two
seconds.
4. Re-install the dome cover.
CAUTION —
Do not apply excessive force. Inserting the tool too far will damage the camera.
Resetting to Factory Default Settings
16
