1. Use the mounting template to cut a hole in the mounting surface.
2. Remove the mounting template and pull the required cables through the mounting hole.
(Optional) Attaching the Back Panel for Plenum Installation
If you are installing the dome camera into a plenum space, install the back panel.
1. Attach a conduit connector to the cable entry hole on the back panel. Install the conduit and its fitting as
instructed by the manufacturer.
2. Pull the required cables through the conduit, then through the cable entry hole in the back panel.
Figure 1:
Cables going through the conduit connector (1) and the back panel (2).
(Optional) Attaching the Back Panel for Plenum Installation
7
