Installing the Dome Cover
1. Align the notches on the dome cover with the release tab on the base. The dome cover should be flush
against the camera base.
2. Slide the dome cover clockwise until it locks into place.
NOTE:
Be careful not to scratch the dome bubble.
For More Information
Additional information about setting up and using the device is available in the following guides:
l
Avigilon Control Center Client User Guide
l
Avigilon High Definition H.264 Web Interface User Guide
l
Avigilon Camera Configuration Tool User Guide
The manuals are available on the Avigilon website:
http://www.avigilon.com/support-and-downloads
Installing the Dome Cover
10
