Flying with the EXP5000
600-00157-000 Rev. 06
-31-
Entegra EXP5000 PFD
HSI will display the appropriate course deviation indicator. The
moving map from the associated GPS will still be displayed.
For more information about the Wind Vector and the HSI moving map
display, see Section 2.3, "EXP5000 Lower Half Display" on page 11
Use the
Bearing
button to select the Nav source for the blue double-
line bearing pointer. If the selected bearing source is a Localizer, the
bearing pointer does not display.
To take full advantage of the EXP5000, GPS 2 can be loaded with
Direct-To waypoints, alternative flight plans, or Navaid frequencies to
provide additional guidance beyond what is loaded into GPS 1. This
information can be selected for display on the EXP5000 as the
Bearing
.
While using the crossfill capability of dual-configured GPS systems is
fully supported and a common technique, it can prevent you from
taking full advantage of the multiple Nav source display capability of
the EXP5000.
For information about loading data into your GPS/VHF unit see the
Pilot’s Guide
for your GPS/VHF system.
Note
: The CDI on the EXP5000’s HSI comes from the selected
Nav
source
which may be different from the CDI displayed on the GPS 1 or GPS 2
displays.
Summary of Contents for Envision EXP5000
