
Climb-out/Enroute
3-11
The heading knob can be adjusted at any time (before or after
entering pilot selectable intercept mode) and the system will
adjust the intercept angle accordingly.
The desired means of mode entry is via a simultaneous push of
both the heading (HDG) and lateral nav (GPSS or NAV) buttons
on the autopilot control panel. However, an alternative technique
is to press and hold one of the buttons, and while that button is
still depressed, press the other paired button. For example, for a
30-degree intercept of a Nav course, the HDG button can be
pressed and held, and while that button is depressed, press the
NAV button. When both are released, the heading mode will be
active and NAV mode will be armed just as intended.
To disarm the intercept, press the “HDG” button. To re-arm the
intercept, press “HDG” and either “NAV” or “GPSS” again.
The autopilot modes annunciator indication for pilot selectable
intercepts are a green “
HDG
” and a cyan “
NAV
” or “
GPSS
”. As
the lateral nav course is approached, the “HDG” annunciators
and buttons on the autopilot control panel extinguish and the
“
NAV
” or “
GPSS
” annunciators and button turns green and
flashes for up to 10 seconds indicating the system is capturing
the lateral nav course. At the end of the flashing period, both the
modes annunciator and the control panel button are displayed in
steady green.