1
24V motorised cylinders
2
Control unit
3
Pillar mounting bracket
4
Gate mounting bracket
5
Clevis pins
6
Spacer
7
Elastic pin
8
Remote control
9
Flashing light
9
x 1
8
x 2
EQUIPMENT REQUIRED (NOT SUPPLIED)
The tools and screws required for the installation must be in good condition and compliant with applicable safety standards.
¡
¡
¡
[
[
¡
¡
¡[
¡
[
[
¡[
¡
drilling the
post
flashing light
actuators
attachment to the post:
- electronic panel
- flashing light
attachment of the
brackets
onto the posts:
3m cable
2 x 0.5mm2
10m cable
2 x 1.5mm2
drilling into
the gate
1
x 1
3
x 4
4
x 2
2
x 1
5
x 1
5
x 1
6
x 4
7
x 4
Thank you for purchasing an AVIDSEN automatic gate opener.
This document is a quick start guide detailing the main installation steps as well as the equipment required. To install, please download the installation
manual from the following webpage: www.avidsen.com/produits/recherche.php
Warning: The safety instructions and installation instructions can be found in the installation manual. Follow all these instructions, as an
incorrect installation can cause serious injuries.
CONTENTS OF THE KIT
V2
STYRKA310
TELESCOPIC
MOTOR DRIVE KIT
Piston-style – For 2-panel gates
Ref. 114170
EN
attachment of the
brackets
on the gate:
Choose a screw/nut
system
appropriate for the
thickness of the gate.
There are 4 attachment
points
