Avidsen IPC280-i, Manual

Page: 32 / 198

14
en
If there is a problem or the login details have been
lost, the camera can be reset to its default settings
by pressing the Reset button on the side of the
camera for 10 seconds.
Settings Default value
Username admin
Password admin
Time Zone GMT+1
Ports http: 80
rstp: 554
rtp: 6600
ONVIF: 8080
ftp: 21
Plug and play access Enabled
Motion detection Disabled
Main video stream 720p @ 25 frames per
second
Secondary video stream 640 x 352, 25 images
per second
Night vision auto
720P HD WiFi iP camera
g - rESETTiNg
Symptoms Possible causes Solutions
Incorrect video settings
The camera feed cannot be
accessed over the internet
Network configuration problem Check your device settings (box,
router)
Check the video settings and
reduce the quality if necessary
Test the "flux secondaire
[secondary stream]" to confirm
Cannot connect to camera over
local area network (e.g. IPCam
Search)
Network problem Check your connections.
Temporarily connect using the
network cable if the camera is
connected over WiFi
Network configuration problem Check your camera's network
connection settings. Reset
your camera if it is no longer
accessible.
H - FAQ
If your problem is not covered below, please contact our helpline