E6L RAM Reseating and Cable Rework
4
To reposition the cable:
1
Use cutters to snip the upper cable tie (be careful to avoid damaging the cable).
2
Move the upper cable bundle out of the way, then use small cutters to carefully cut the lower cable tie (be very careful not to damage
the RAM or cut the cable jacket).
3
Unplug the larger molex connector and move the longer cable from the outside to the inside of the molex connector, then reconnect
the molex connector.
Figure 6. Upper cable tie to cut and remove
Figure 7. Lower cable tie to cut and remove
Figure 8. Unplugging the molex connector (shown at left) and the molex connector re-connected with cable correctly routed (shown at right)
