Studio Monitor Express
12
Windows Config Tab
The
Config
tab on Windows lets you set levels for
Dim
and
Fixed
outputs, lets you enable hardware inputs and outputs that patch
to sources and destinations, and displays diagnostic information.
Set Dim Level
This sets the attenuation amount (in dB) for the program signal when using the talkback function.
Set Fixed Level
This sets the fixed output level, which is selectable in the
Main
tab for the
Control Room
output. This is useful for setups that have
been calibrated to a specific reference level and must maintain a fixed output level.
CPU Usage
This meter shows SME CPU usage.
Sample Rate
This shows the current sample rate to which SME is locked. This is only an indicator since the sample rate is determined by your
sound card’s settings.
Settings
This enables saving the current settings or loading previous settings, to quickly switch between different SME configurations.
Enable Hardware Ports
This lets you explicitly enable or disable each SME port. This limits the ASIO stream inputs and outputs monitored by SME, thus
minimizing traffic on the audio bus to only those ports necessary for the current setup. Only ports enabled here are available for
routing on the other SME tabs (such as
Main
and
Sources
).
Config tab (Windows)
