Avid Technology SR2400, Setup Manual, Page: 84 / 90

Appendix D Configuring Legacy MEDIASwitches
84
Installing a GBIC Connector
n
You can install the GBIC while the MEDIASwitch is turned on.
4. Slide the optical GBIC into the MEDIASwitch port. You should hear the
retainer clips click when the optical GBIC is seated in the port.
5. Remove the protective covers from the optical cable connector on the
optical cable.
6. Remove the protective cover from the optical GBIC in the
MEDIASwitch.
7. Attach the connector on the optical cable into the optical GBIC for the
client (see figure “Port Layout for 1-Gb MEDIASwitches” on page 85 ).
Firmly push the plug on the optical cable into the connectors on the
optical GBIC.
8. Label the optical cable with the name of the PortServer system to which it
connects.