Avid Technology SR2400, Setup Manual, Page: 78 / 90

Appendix C Using the Product Recovery CD-ROM
78
18. Click OK on the Install from Disk dialog box.
19. Select the ATTO ExpressPCI-FC 3300 Fibre Channel Adapter in the
Select a Device Driver screen.
20. Click Next. An Update Driver warning appears.
21. Click Yes. The Start Device Driver Installation screen appears.
22. Click Next. A Digital Signature Not Found dialog box opens.
23. Click Yes. The driver installs and the Completing the Upgrade Device
Driver screen appears.
24. Click Finish.
25. Click Close in the ATTO Phantom Device Properties dialog box. The
System Setting Change dialog box opens.
26. Click Yes to reboot the PortServer system.
Updating the ATTO Fibre Channel Driver
Use the following instructions to update the ATTO Fibre Channel driver on
the PortServer system.
To install the ATTO Fibre Channel driver on the PortServer system:
n
You must be logged in as an Administrator to update drivers.
1. Insert the MediaNetwork CD-ROM into the PortServer CD-ROM drive.
The MediaNetwork Installation window opens after approximately 1
minute.
2. Click Exit to close the MediaNetwork Installation window.
3. Right-click the My Computer icon on the desktop, and select Manage.
The Computer Management window opens.
4. Click Device Manager in the left pane of the window. A list of devices
appears in the right pane of the window.
5. Expand SCSI and RAID Controllers. A list of available controllers
appears in the right pane of the window.
6. Right-click ATTO Adapter, and select Properties. The Fibre Channel
Controller Properties dialog box opens.
7. Click the Driver tab.