Avid Technology SR2400, Setup Manual, Page: 80 / 90

Appendix C Using the Product Recovery CD-ROM
80
To uninstall the existing Alacritech Ethernet adapter board driver:
1. Click the Start button, and select Settings > Control Panel. The Control
Panel window opens.
2. Double-click the Add/Remove Hardware icon. The Add/Remove
Hardware Wizard opens to the Welcome screen.
3. Click Next. The Choose a Hardware Task screen appears.
4. Click Uninstall/Unplug a device.
5. Click Next. The Choose a Removal Task screen appears.
6. Click Uninstall a device.
7. Click Next. The Installed Devices on Your Computer screen appears.
8. Select Alacritech Accelerator in the list.
9. Click Next. The Uninstall a Device screen appears.
10. Select the “Yes, I want to uninstall this device” option.
11. Click Next. The device uninstalls in approximately 30 seconds and the
Add/Remove Hardware Wizard closes.
12. Reboot the PortServer system.
To install the Alacritech Ethernet adapter board driver:
1. Log in to the PortServer system. The Found New Hardware Wizard
opens.
2. Click Cancel. The Found New Hardware Wizard closes.
3. Locate the MediaNetwork CD-ROM in the PortServer or PortServer Pro
system kit.
4. Insert the MediaNetwork CD-ROM into the PortServer CD-ROM drive.
The CD-ROM is set to auto-start and open the Avid Unity Installation
window. This takes approximately 30 seconds.
5. Click Exit to close the Avid Unity Installation window.
6. Navigate to
Drivers_Firmware\NetworkAdapters\Alacritech\w2k_XP\6.3.0.5 on the
MediaNetwork CD-ROM.
7. Double-click the setup or setup.exe icon. The Alacritech Accelerator
Setup window opens.