Chapter 4: Using Pro Tools | SYNC HD
43
Window Dub Requirements
Existing Video Signal
SYNC HD can only insert a
timecode window into an existing SD video signal.
This means that at least one video source signal
(from a VTR, nonlinear editing system, or other
video device) must be present at one of the
SYNC HD video input connectors (Video In or
Video Ref). When generating a window dub, the
VITC Timing Rule applies (see “VITC Timing
Rule” on page 57.
SYNC HD Output
The signal from the SYNC HD
Video Out connector must be routed to a video
destination such as another VTR or nonlinear edit-
ing system.
To insert a timecode window into a video signal
using Pro Tools:
1
Choose
Setup > Peripherals
and click
Synchro-
nization
.
2
Select
Enable Dub Window
.
3
Configure any of the following window dub ap-
pearance settings from the corresponding pop-
up menu: Vertical Position, Horizontal Position,
Size, and Color.
Vertical Position
Sets the vertical position of the
window dub, relative to the bottom of the video
picture. The choices range from 10% From Bottom
to 50% From Bottom, in 10% increments.
Horizontal Position
Sets the horizontal position of
the window dub within the video picture. The
choices include Extreme Left, Left, Center, Right
and Extreme Right.
Size
Sets the relative size of the window dub
(Small or Large).
Color
Sets the color of the timecode numbers in
the window dub, and the color of the window dub’s
background. The choices include
White on Black
Bkgnd
;
Black on White Bkgnd
;
White on Video Bk-
gnd
; or
Black on Video Bkgnd
. (“Video Bkgnd”
makes the window dub background transparent, so
that the timecode numbers are displayed directly
on top of the video signal.) The default setting is
White on Black Bkgnd
.
4
Click
OK
.
To insert a timecode window into a video signal
using the front panel controls:
1
Press Set, and use the Down and Up switches to
display Burn Enabled (“burn EnA”).
2
Press Set. The display shows the current On or
Off setting for Window Burn.
3
Use the Down and Up switches to switch be-
tween the parameter values.
4
Press Set.
Based on the selected positional reference, the
timecode character generator burns timecode ad-
dresses onto any video signal passing through the
SYNC HD.
“10% from Bottom” vertical position is out-
side the standard “safe title” area, which
means it may not be visible on some video
monitors.
The “Extreme” horizontal positions are out-
side the standard “safe title” area, which
means they may not be visible on some video
monitors.
Default window dub settings are listed in
“Restoring Factory Settings” on page 53.
Summary of Contents for Pro Tools SYNC HD
