38
Installing an LVD Shuttle
Each MediaDock 2+ enclosure provides slots for two LVD shuttles.
(You must purchase LVD shuttles separately.) This section explains
how to install an LVD shuttle in the MediaDock 2+ enclosure.
Each LVD shuttle has two handles. The bottom handle is stationary,
while the top handle can be pulled outward from the left of the LVD
shuttle by pressing a latch on the inside of the handle (see
When you close the top handle with the LVD shuttle partially in the
MediaDock 2+ enclosure, the lever catches the enclosure and gently
connects the LVD shuttle into the MediaDock 2+ backplane.
Figure 2-9
LVD Shuttle Latch and Handles
To install an LVD shuttle:
1. Carefully align the LVD shuttle in front of the empty slot
(
).
2. Pull the top handle outward to the open position.
Lever
Bottom handle
Top handle
Latch