39
3. Insert the LVD shuttle into the slot and gently push until you feel
the contact with the inside of the MediaDock 2+ enclosure.
Figure 2-10 Inserting the LVD shuttle
4. Gently but firmly close the top handle.
The LVD shuttle will automatically spin up when power is applied to
the MediaDock 2+ enclosure. If the MediaDock 2+ enclosure is already
powered up and you insert an LVD shuttle, the shuttle will spin up as
soon as it is fully latched into the MediaDock 2+ enclosure.
Removing an LVD Shuttle
Removing the shuttle can be accomplished in different ways
depending on the operating system you are using and the utilities
available to you. Sometimes, Windows operating systems reassign the
drive letters when an LVD shuttle is added or removed and do not
always detect when an LVD shuttle is inserted.
The following sections describe your options:
•
Replacing an LVD Shuttle Using Any Operating System
(simplest)
•
Replacing an LVD Shuttle on a Windows 2000 System
•
