30
Unpacking the MediaDock 2+ Enclosure
Unpack the MediaDock 2+ enclosure and check the contents of the
package to ensure that all parts were shipped. The package should
contain:
•
One MediaDock 2+ enclosure
•
One power cable
•
The
Avid MediaDock 2+ Setup and User’s Guide
(this guide)
Avid recommends that you use a grounded, surge-protected ac outlet
with the MediaDock 2+ enclosure. You will also need a Phillips
screwdriver to install the rack-mount brackets.
If you are installing an optional DVD writer, you will also need a
5/16-inch extended length nut driver. Instructions for installing a
DVD writer can be found in
. You should use a grounding
wrist strap if you are installing a DVD writer in the optional bay.
Power Cord Connection
This section describes how to connect the power cord to the
MediaDock 2+ enclosure.
To connect power to the MediaDock 2+ enclosure:
1. Attach one end of the power cord to the power supply connector
(see
).
