Avid Technology HD MADI, Manual

Page: 30 / 36

HD MADI Guide 26
Bus
The Bus page lets you configure internal and
output bus signal path names and formats, and
map output busses to output paths (defined on
the Output page). Multichannel busses (stereo
or greater) can have any number of sub-paths.
Output bus and internal mix bus names and
channel formats are saved with the session. Out-
put bus paths to output channel mappings are
automatically generated depending on the de-
fined session output bus paths and the available
system output channel paths.
Insert
The Insert page of the I/O Setup lets you name
Hardware Inserts that you may have connected
to your Pro Tools audio interface.
Mic Preamps
The Mic Preamps page of the I/O Setup is used
for configuring hardware connections with a
PRE peripheral (if present). PRE requires an an-
alog to MADI converter to connect to HD MADI.
H/W Insert Delays
The H/W Insert Delays page of the I/O Setup is
used for compensating for the delay (latency) of
any Hardware Inserts.
I/O Setup, Bus page
I/O Setup, Insert page