![background image](http://html1.mh-extra.com/html/avid-technology/eucon/eucon_application-setup-manual_3031366018.webp)
Chapter 4: Final Cut Pro
15
Chapter 4: Final Cut Pro
Configuring Final Cut Pro to operate with the Artist media controllers is simple.
1
In Final Cut Pro, choose
Tools->Control Surfaces
.
The Control Surface Configuration dialog opens.
2
Select
Euphonix
from the Use drop-down menu.
You will see the Euphonix logo with the message in the figure, above.
3
Press
OK
.
The Artist media controllers connect and update automatically. When you open your audio mixer your Euphonix media con-
troller(s) will control Final Cut Pro.
Your Artist media controller should now be controlling your application. If not, make sure Final Cut Pro is the front-most appli-
cation (i.e., the one receiving keystrokes and mouse clicks). The Artist media controllers control only the front-most application.
Control Surface Configuration Dialog
Summary of Contents for EUCON
