AVG-UHMS44
3.
Please remember to end
the commands with the ending symbols “.” and “;”.
4.
Type the command carefully, it is case-sensitive.
5.3.5. RS232 Control Modes
To control the AVG-UHMS44, you need to connect its 9 pin female RS232 port to a
PC’s RS232 port, or you can just connect any one of the HDBaseT receiver’s RS232
port with PC (RS232 command can be transmitted to the AVG-UHMS44 via the
twisted pair). By using RS232 control software and with the right specification
settings, you are able to control the AVG-UHMS44.
Controlling the AVG-UHMS44 from local PC
Control the AVG-UHMS44 from local
Controlling the AVG-UHMS44 from a remote device
Control the AVG-UHMS44 from a remote device
Summary of Contents for AVG-UHMS44
Page 34: ...AVG UHMS44 7 Panel Drawing ...
