AVG-HDWP70TX-B
5. Operations
5.1. Operations of the front panel buttons
AVG-HDWP70TX-B has a channel switching button on the front panel, through
which users can switch input source signals.
It supports both manual switching and auto switching. (Default: Auto switching)
Press and hold the switching button for 3 seconds or send command “
50770%
“ and
“
50771%”
to switch between the two modes.
Switching modes:
Auto switching mode
In this mode, the indicator will illuminates green, and AVG-HDWP70TX-B will
recognize the last connected source device as input source automatically.
Disconnect the present source device, it will select the other source signal (if
there is input signal on the other source).
Manual switching mode
In this mode, the indicator will remain off. Press the switching button to select
input source, it will alternate between HDMI and VGA. Or switch it by sending
RS232 commands.
The indicator of the selected input source will illuminate green.
5.2. RS232 Control
As RS232 can be transmitted bi-directionally between AVG-HDWP70TX-B and
AVG-HD402PR, it is able to control a third party RS232 device locally or control the
AVG-HDWP70TX-B from a remote AVG=HD300R. When controlling a third party
RS232 device, the baud rate of this device should be 2400, 4800, 9600, 19200,
38400, 57600 or 115200.
5.2.1. Installation/removal of the RS232 Control Software
Installation
Copy the control software file to the computer connected with the
AVG-HDWP70TX-B .
Removal
Delete all the control software files in corresponding file path.
5.2.2. Basic Settings
First, connect the AVG-HDWP70TX-B with all input devices and output devices
needed, then connect it with a computer which has the installed RS232 control
software. Double-click the software icon to run this software.
