AVG-HDWP70TX-B
Here we take the software
CommWatch.exe
as an example. The icon is shown as
below:
The interface of the control software is showed as below:
Please set the parameters of COM number, baud rate, data bit, stop bit and the
parity bit correctly, then you are able to send commands in Command Sending Area.
5.2.3. RS232 Communication Commands
Communication protocol:
RS232 Communication Protocol
Baud rate: 9600 Data bit: 8 Stop bit: 1 Parity bit: none
Command
Function
Feedback Example
Switch Commands
50701%
Switch to HDMI input
Switch to HDMI
50704%
Switch to VGA input
Switch to VGA
50705%
Change the horizontal
Hpolarity:0/1
Parameter
Configuration area
Monitoring area,
indicates if the
Command Sending
area
