AVG-HDWP70TX-B
4.4. Connection Procedure
Step 1. Connect HDMI source device (e.g. Blu-ray DVD) to HDMI input ports of
AVG-HDWP70TX-B with HDMI cable. Connect a VGA source device
(e.g. PC) to the VGA input port of AVG-HDWP70TX-B with VGA cable.
Step 2.Connect an AVG-HD402PR to the HDBaseT port on the rear panel with
twisted pair.
Step 3. Connect a HDMI display to the HDMI OUT port of AVG-HD402PR.
Step 4. Connect a control terminal to the RS232 port on the front panel of the
AVG-HD402PR.
Step 5. Connect control device (e.g. PC) to the RS232 port of AVG-
HDWP70TX-B or AVG-HD402PR (bi-directional RS232 control, either
is available).
Step 6.Connect DC 24V power adaptor to the power port of AVG-HD402PR,
AVG-HDWP70TX-B is able to get power from AVG-HD402PR with PoC
solution.
Note:
AVG-HDWP70TX-B supports unidirectional PoC, i.e, Scaler Wall Plate
HDBaseT Transmitter-B can get power from far-end PoC devices with PoC function.
However, it can’t power far-end PoC devices when the power supply is connected.
