AVG-HD600
3. Product Appearance of the AVG-HD600
Transmitter
No.
Name
Description
①
Power LED
RED when DC power present.
②
IR IN
Connect an IR Receiver to collect infrared signal, works in combination
with the far-end IR OUT port.
③
IR OUT
Connect an IR Emitter to send infrared signal, works in combination with
the far-end IR IN port.
④
RS232
Serial port supports bi-directional RS232 pass-through.
⑤
RS232 MODE
switcher
▪
CTRL: RS232 pass-through control mode;
▪
UPDATE A: Update Valens IC program, connect a PC to the RS232
port, and then double-click the update file (.bat).
▪
UPDATE B: Update compression IC program, the upgrade method
is the same as the above UPDATE A.
⑥
ARC Switcher
ON: Enables ARC function; OFF: Disables ARC function
⑦
HDMI IN
Connect a HDMI source here.
⑧
SPDIF OUT
Digital audio output port.
⑨
L+R OUT
Stereo analog audio output port.
⑩
ETHERNET
Ethenet port, works as an Ethernet Switch together with the 2 Ethenet
ports of the Receiver. Connect the router to any
one
of these ports.
⑪
HDBT OUT
Connect to the Receiver via Cat5e/6 cable.
⑫
DC 24V
Connect with the included power adapter. Power is only required at
either the transmitter or the receiver.
IR IN
IR OUT
ARC
OFF
UPDATE A
UPDATE B
CTRL
ON
Tx
Rx
R
L
1
2
3
4
5
6
7
8
9
10
11
12
