AVG-HD600
Receiver
No. Name
Description
①
Power LED
RED when DC power present.
②
IR IN
Connect an IR Receiver to collect infrared signal, works in combination
with the far-end IR OUT port.
③
IR OUT
Connect with IR Emitter to send infrared signal, works in combination
with the far-end IR IN port.
④
RS232
Serial port supports bi-directional RS232 pass-through.
⑤
RS232
MODE
switcher
▪
CTRL: RS232 pass-through control mode;
▪
UPDATE A: Update Valens IC program, connect a PC to the
RS232 port, and then double-click the update file (.bat).
▪
UPDATE B: Update compression IC program, the upgrade
method is the same as the above UPDATE A.
⑥
ARC Switcher
ON: Enables ARC function; OFF: Disables ARC function.
⑦
HDMI OUT
Connect a HDMI display device.
⑧
SPDIF IN/TO TX
Toslink audio input port, connect with an audio source.
Coaxial audio input port, when this port is connected with an audio
source. If using coax, Toslink audio input port shouldn’t be connected.
⑨
ETHERNET
2 Ethenet ports, work as an Ethernet Switch together with the Ethenet
port of Transmitter. Connect the router to any
one
of these ports.
⑩
HDBT IN
Connect to the Transmitter via Cat5e/6 cable.
⑪
DC24V
Connect with the included power adapter. Power is only required at
either the transmitter or the receiver.
Note:
Pictures shown in this manual are only for reference.
IR IN
IR OUT
ARC
OFF
UPDATE A
UPDATE B
CTRL
ON
Tx
Rx
1
2
3
4
5
6
7
8
9
10
11
