AVGear AVG-HD402PR, User Manual

Page: 7 / 16

AVG-HD402PR
3. Product Appearance of the AVG-HD402PR
3.1. Appearance of AVG-HD402PR
No. Name Description
①
ON
Working status indicator, blinks green when the device is
operational, turns off when the device stops working.
②
LINK
Twisted Pair link status indicator, illuminates green when the
connection is successful.
③
IN
HDCP compliance indicator, illuminates green when the
connected device supports HDCP and is working normally;
blinks green when the connected device does not support
HDCP.
④
POWER LED Illuminates red when power is on.
⑤
HDBT IN
Connects to the HDBT OUT port of a AVG-HD402T with a
CATx cable.
⑥
HDMI OUT Connects to HDMI display device.
⑦
IR IN
Connect with IR receiver, the IR signal received from this port
can only send out via a AVG-HD402T.
⑧
IR OUT
Connect with IR transmitter, the sent IR signal are received by
AVG-HD402T.
⑨
RS232
Serial port, 3-pin captive screw connector, connects with the
control terminal, supports bi-directional RS232 control.
⑩
DC 24V
Connect with power supply (Not necessary if AVG-HD402T
connects with power).
Note: Pictures shown in this manual are for reference only.