AVGear AVG-HD402PR, User Manual

Page: 8 / 16

AVG-HD402PR
3.2. Appearance of AVG-HD402T
No. Name
Description
①
ON
Working status indicator, blinks green when the device is
operational, turns off when the device is not working.
②
LINK
Twisted Pair link status indicator, illuminates green when the
connection is successful.
③
IN
HDCP compliance indicator, illuminates green when the
connected device supports HDCP and is operational; blinks
green when the connected device does not support HDCP.
④
POWER
LED
Illuminates red when power is on.
⑤
HDBT OUT
Connect to the HDBT IN port of a AVG-HD402PR with a CATx
cable.
⑥
HDMI IN Connects to a HDMI display device.
⑦
IR IN
Connects with IR receiver, the IR signal received from this port
can only send out via a AVG-HD402PR.
⑧
IR OUT
Connect with IR transmitter, the sent IR signals are received by
AVG-HD402PR connect with IR transmitter, the sent IR signal
is received by the TPHD402PT.
⑨
RS232
Serial port, 3-pin captive screw connector, connects with the
control terminal, supports bi-directional RS232 control.
⑩
DC 24V
Connect with power supply (Not necessary if AVG-HD402PR
connects with power).
Note: Pictures shown in this manual are for reference only.