AVG-DMM1616
5. System Operations
5.1. Front Panel Button Control
Users can control the AVG-DMM1616 simply and directly with its front panel buttons.
To switch AV/ and A/ V signal, please operate the buttons using the following format:
Format: “Input Channel” + “AV” +“Output Channel “+“Enter”
Note:
1) “Switch Mode”: Audio & Video synchronous (AV) or break away switching mode
(Audio/ Video)
2) “Input Channel”: Push the number of the input channel to be controlled,
3) “Output Channel”: Push the number of the output channels to be controlled. Press
“All” to select all the outputs.
4) Use “,” button to separate multiple I/O channels, and press the “ENTER” button to
confirm the operation.
5) The input/output channels on the rear panel are slotted from left to right, top to
bottom.
6) The input delay time between two numbers of every input & output channel must
be less than 5 seconds; otherwise the operation will be cancelled.
Example:
1. To transfer input 1 to output 11, press input “1”, output “0” “1” and “Enter”.
2. To transfer signals from input 1 to all output channels, press buttons in this order:
“1”, “All”.
Other Functional Buttons:
Buttons
Description
Operation
UNDO
Returns to the
previous
status
State 1: Input 6 -> output 6 Press input “6” + “AV”+
output 4 to change the connection. Press “Undo” to
return to State 1.
Backspace
the last
operation
If you press buttons “1”, “AV”, “2”, “ ” in order, then “2”
will be canceled.
THROUGH Get one to
one I/O
connection,
e.g. input 1->
output 1,
input 2->
output 2.
Format: “Input C”Through” If you press
buttons “ALL”, “THROUGH” in order, then the result
will be like input 1 output 1, input 2 output 2, input
3 output 3 … input 16 output 16.
