AVG-DMM1616
No. Detailed Information
1
1080p 2D 5.1CH
2
1080p 2D 2.0CH
3
720p 2D 5.1CH
4
720p 2D 2.0CH
5
4kx2k 2D 5.1CH
6
4kx2k 2D 2.0CH
Update in-built EDID data by sending command UpgradeIntEDID[x].
Examples:
1. Transfer signals from an input channel to all output channels: [x]All.
Example: Send “3All.” to transfer signals from the input 3 to all output channels.
2. Transfer all input signals to corresponding output channels
respectively: All#.
Example: If this command is carried out, the status of matrix will be: 1->1, 2->2, 3->3,
4->4…… 8->8….
3. Switch off all the output channels: All$.
Example: After running this command, there will be no signals on all the outputs.
4. Switch off the detail feedback command from the COM port:
/:MessageOff;
But, it will leave the “switch OK” as the feedback, when you switch the matrix.
5. Switch on the detail feedback command from the COM port:
/:MessageOn;
It will show the detail switch information when it switch. Example: when switch 1->2,
it will feedback “AV01 to 02”.
6. Transfer signals from an input channel to corresponding output
channel: [x]#.
Example: “5#.” to transfer signals from the input5 to the output5.
7. Switch off an output channel: [x]$.
Example: “5$.” to switch off the output 5.
