AVG-DMM1616
Controlled by PC(s) in LAN
Connect the AVG-DMM1616, a router and several PCs to setup a LAN (as
shown in the following figure). Set the IP Subnet and gateway of the AVG-
DMM1616 to the same as the routers to allow PC’s system control over the LAN.
Follow these steps to connect the devices:
Step 1.
Connect the TCP/IP port of the AVG-DMM1616 to Ethernet port of PC with
twisted pair.
Step 2.
Set the PC’s IP address and gateway to the same as the AVG-
DMM1616’s. Do please remember the PC’s original IP address and
gateway.
Step 3.
Set the AVG-DMM1616’s IP address and gateway to the same IP subnet
as the router.
Step 4.
Set the PC’s IP address and gateway the same as the original settings.
Step 5.
Connect the AVG-DMM1616 and PC(s) to the router. PC(s) within the LAN
are able to control the AVG-DMM1616 asynchronously.
5.4.2. TCP/IP Settings
Step 1. Connect the TCP/IP port of the AVG-DMM1616 to Ethernet port of a PC with
twisted pair.
Step 2. Set the PC’s IP and gateway to the same IP subnet as the default IP of the
AVG-DMM1616 (192.168.0.178).
Step 3. Enter the http://192.168.0.178:100 into an Internet Explorer browser, you will
see the LOGIN page.
Step 4. Enter user name “admin” and password “admin”, then press the Enter
button. (Not the Enter key on your keyboard.) Then you can enter the
configuration page to configure the IP port, including the IP reset, Serial reset
and password reset etc. As picture below:
