AVG-CSK4K-44
Receiver. There are 4 IR OUTPUT sockets marked on the
IR matrix
④
OUTPUTS
HDBaseT:
The HDBT RJ45 outputs deliver HD
video, Audio and PoC to the HDBaseT Receiver up
to 70m
HDMI:
Connect an HDMI cable from the Matrix
Switcher to the display
SPDIF:
Digital audio output connects directly via an
optic fiber cable to a Toslink input on source
equipment
RCA (L&R):
PCM Analogue audio output sockets
supply the de
-
embedded audio
⑤
Control
TCP/IP:
RJ45 port. Connect with a PC for Web-
based GUI control.
RS232:
Serial port for unit control, 3-pin phoenix
plug, connects with a control device (e.g. Control
processor)
⑥
DC 24V
Connect with a DC24V 2.71A power adaptor
Note:
Pictures shown in this manual are for reference only.
3.2 HDBaseT Receiver
1. Front Panel
No.
Name
Description
①
HDMI OUT Connect to a HDMI display
②
IR IN
Plug in the IR receiver, this will receive the IR signals from a
remote and send through to the Matrix Switcher and then control
the desired source
③
IR OUT
Plug in the IR emitter and attached to the fornt of the display,
this will send the IR signals from the Matrix Switcher to control
the display which is connected to the HDMI OUT port
