AVG-CSK4K-44
5.1.2 Using the IR Remote
5.1.2.1 Switching I/O connection
1. To switch one input to an output:
Example: Input 1 to Output 3
→Press INPUTS 1 + OUTPUTS 3 + ENTER
NOTE:
Default status, on first boot up this matrix assigns the IR outputs to the
corresponding HDMI input, meaning, IR out 1 is directly associated to HDMI input 1
and so on. When you switch an HDMI input to a different output, the corresponding
IR OUT will be switched synchronously to allow the IR commands to be sent from
the select zone back through the Matrix Switcher to the source.
2. To switch an input to multiple outputs:
Example: Switch Input 2 to Output 3 and 4
→Press INPUTS 2 + OUTPUTS 3 + OUTPUTS 4 + ENTER
3. To switch an input to all outputs:
Example: Input 1 to all Outputs
→Press INPUTS 1 + ALL + ENTER
5.1.2.2 EDID Management
The 4K Home Distribution Hub Kit features EDID management that enables the
Matrix Switcher to learn the EDID of all sources and sink devices. The Matrix
Switcher can learn the EDID from any device or be programmed to assign an EDID
to the mirror port through EDID Invoking.
1. EDID Learning
（
from output
）
:
One input port learns the EDID data of one output port:
Example: Input 2 learns EDID data from output 4
→
Press EDID + INPUTS 2 + OUTPUTS 4 + ENTER
All input ports learn EDID data from one output port:
Example: all input ports learn EDID data from output 4
→
Press: EDID + ALL + OU ENTER
