AVGear AVG-CS4K-88, User Manual

Page: 8 / 32

AVG-CS4K-88
HDMI inputs
②
OUTPUTS

7 x HDBaseT outputs: The HDBT RJ45 outputs
deliver HD video, Audio and PoC to the HDBaseT
Receiver up to 70m

1 x HDMI output: Connect an HDMI cable from the
Matrix Switcher to the display
③
IR IN

7 x IR IN : Connect a 5V IR receiver, fixed IR input
for the output, cannot be switched separately. It
makes up an IR bi-directional TX path with the IR
OUT on the corresponding HDBaseT receiver.

1 x IR CONTROL : Connect an extended 5V IR
receiver, use the IR remote to control the Matrix
Switcher
④ IR OUT

7 x IR OUT: Plug in the 5V IR Emitter and attach to
the front of the Source. This then emits the IR signal
received from the HDBaseT Receiver. There are 7
IR OUTPUT sockets marked on the IR matrix.

1 x IR ALL OUT : Plug in a 5V IR emitter to deliver
the IR signal to control the input source device from
any of the far-end receivers.
⑤
Control

RS232: Serial port for unit control via a phoenix
plug that connects to a control device (e.g. Control
processor)

TCP/IP: RJ45 port. Connect with a PC or Tablet for
Web-based GUI control.
⑥
Audio outputs

SPDIF:
Digital audio output connects directly via an
optic fibre cable to the Toslink input on a sound bar.

RCA(L+R):
PCM Analogue audio output sockets.
⑦
Power AC 100V-240V. Connect using an IEC power lead.
Note: Pictures shown in this manual are for reference only.