AVG-CS4K-88
Controlling a Local Device remotely
Note: Send command “%0901.” to enter infrared carrier enforcing mode if the 5V IR
Receiver connected to IR IN of the receiver does not have an IR carrier.
Multiple to Multiple: (IR Matrix)
The 8
“IR OUT” ports and the 7 “IR IN” ports on the far-end receivers make up a
7x8 IR matrix. See as below:
IR Matrix
The IR signal is sent from an IR remote, this is transferred via a 5V IR receiver to the
HDBaseT receiver, then to the corresponding zone, finally it is transferred to the IR
OUT port to the relevant source via an Emitter.
