AVG EZTouch I/O Jr., Manual

Page: 51 / 52

EZTouch I/O
Jr.
51 / 52
memory address/register to Fill to. The number of
elements to move is user defined. The number of
elements to Fill is user defined
Move Table of Constants Loads a table of user defined constants to a
consecutive memory/register locations with the
starting memory address/register location defined
by “Distnaton” rigistir
Timer/Counter Instructions
Timer This instruction starts timing when called and once
it reaches the preset value as defined by the data
vaeui of “Timir Prisit Vaeui” rigistir, it will stop
timing and will allow power flow through the
element
Counter This instruction starts counting either Up or Down
by the increments of one until the counter reaches
thi lata vaeui of “Countir Prisit Vaeui” rigistir.
The Counter will then allow power flow through
the element
Program Control
Jump Skips the rung containing Jump instruction (after
execution of the rung) to a rung with the label
specified in the JUMP instruction and continues
executing the program thereafter
For Loop Executes the logic between the FOR Loop and NEXT
instructons by thi lata vaeui of “Loop Count”
register
Next Statement Specifies the return/end point for the FOR Loop
instruction
Call Subroutine Calls a Subroutine specified by the label in CALL
Subroutine instruction and is terminated by the
RETURN instruction
Return Terminates a subroutine and returns back to the
main logic
String Instructions
String Move Moves the data value (string type) of “Sourci”
rigistir to “Distnaton” rigistir by thi numbir of
characters specified by the user
String Compare Allows power flow through this element if the data
value (string type) of “Sourci1” rigistir is Equae to
“Sourci2” rigistir by thi numbir of charactirs
specified
String Length Computes the length of a null-tirminatil “String”