199
AVG 8.5 Internet Security Network Edition © 2009 Copyright AVG Technologies CZ, s.r.o. All rights reserved.
user on the local station will not be able to customize it.
For more information see chapter Configuration/Shared Settings for
Stations/Groups/
General control and priority levels
.
·
Scheduled scan cancellation
You can decide, whether you want to allow the local user to stop a running
scheduled scan or not. This can be done via Shared settings for stations/
groups or in the individual station settings. To do so, navigate to Schedules/
Scheduled scan item and in the right part of the dialogue tick the User can
stop a running task checkbox.
11.8.Requests handling and status messages
This chapter describes requests, their handling and processing within AVG
DataCenter.
·
Requests sent to a single station
If a request is invoked from AVG Admin Console (e.g. request for settings
synchronization, update performing, etc.) a message appears in the Status
Window and at the same time, the request is stored within the AVG
DataCenter.
Then the station is notified about the request and if it is online, it will start
processing it immediately. Information about the result is delivered back to
the AVG DataCenter and instantly displayed in the Status window. Error
messages appear in red color.
In special cases two situations may happen:
·
The station is online but for some reason cannot accept the request (e.g.
notification port is not working correctly for some reason), the server
will try to periodically delivery the request (default interval is five
minutes).
Note: This interval can be changed in Shared settings for stations/
groups, Remote Administration item, advanced settings section,
Retrieve messages from server every drop down menu.
·
The station is offline and will receive the request immediately after it
gets online.
