28
ZM605 Indicator User Instructions
Supervisor menu
6 Supervisor menu
The supervisor menu allows access to the items related to the Accumulation
application. Follow the steps below to access the menu items described.
Press and hold the
SETUP
key until the password entry screen appears. Enter the
Supervisor password, 1793 and press the
ZERO
key and the screen below appears.
Highlight the item you wish to set and press the
Enter
key. The definitions of each item
in the Supervisor menu are described below.
SuPEr
This is the top item in the Supervisor menu.
tArE
This item appears only if Preset Tares are enabled. Use this to enter tare
weights for up to 10 Preset Tares.
Edit
Use this to set the tare weight for Tare 1 through Tare 10.
Use this to print the tare list to your desired port or to the USB port.
See
Printed Preset Tare report example on page 29
rESEt
Use this to clear all tares in memory.
AccuM
Use this item to set the accumulation paramaters below.
Prt Tot
This stands for Print Total. If enabled, during normal operation the
user can press and hold
for three seconds and the selected
print format (see
Tot Fmt
section below) will be sent to any port
that is configured. The display will flash
Prn-tot
.
Tot Fmt
This stands for Total Format. This is the designated print format
number used for the accumulated totals of the current active
channel. (Format 8 is the default).
scroll up and down list then enter to select
Esc
Super
Press the
Enter
key and the next screen appears.
scroll up and down list then enter to select
Esc
TARE
ACCUM
The
TARE
item appears only if Preset Tares are enabled.
If the Preset Tare list has been reset and you print the Preset Tare report the 10
memory channels will be listed but all the weights will be 0.
