34
ZK840 Picklist Application User Instructions
Supervisor menu
Extend key
This accesses an extended list of 10 alpha fields to define and 10 prompts, one for each
field. It also has 10 numeric fields and prompts you can define. A UDF us a User
Defined Field you can create.
These can be used to hold other principal data that can be stored in the PLU or can be
used by a custom application.
ACCUM key
This accesses the following list of accumulator related functions you can turn
On
or
Off
:
Accumulator Net
If on, this will be shown in the database.
Accumulator Counts
If off, no accumulation shown in database or on
screen.
Transactions
If off, no transaction shown in database or on
screen.
Inventory
Location
If off, no location shown in database or on
screen.
Case
Counting
Not applicable in this application. May be used
for custom applications.
Pallet
Counting
Not applicable in this application. May be used
for custom applications.
Pack Size
Not applicable in this application. May be used
for custom applications.
Average Run Weight
Not applicable in this application. May be used
for custom applications.
Average Run Count
Not applicable in this application. May be used
for custom applications.
Max. Run Weight
Not applicable in this application. May be used
for custom applications.
Min. Run Weight
Not applicable in this application. May be used
for custom applications.
6.1.3 APP key
When you press the
APP
key the
App Configuration
list appears. Highlight the
desired item and press
Enter
(
) to access that item. Each item in the list is explained
below.
Verify Plu
Setting is either true or false. When set to true, as the application
steps from one PLU to another the user has to validate they have
the correct part by scanning the PLU barcode. If it matches then
the user can progress.
Verify Target
Setting is either true or false. When set to true the application will
not step on to the next item until the target (weight or count) is
within the configured tolerance band.
