Avery Weigh-Tronix PC-905, User Instructions

Page: 8 / 36

8 PC-905 Counting Scale User Instructions
Scale Setup and Operation
This section of the manual covers getting your scale ready to work and
operating the scale. This section is divided into the following:
• 3.1 - Unpacking the Scale (page 8)
• 3.2 - Installing the Scale (page 8)
• 3.3 - Battery Power Option (page 9)
• 3.4 - Operation as a Scale (page 10)
• 3.5 - Operation as a Counting Scale (page 11)
• 3.6 - Counting Using a Known Piece Weight (page 12)
• 3.7 - Counting Using Bulk Sampling (page 13)
• 3.8 - Counting Using Dribble Sampling (page 14)
• 3.9 - Using Reverse Sampling for Counting, Method 1 (page 15)
• 3.10 - Using Reverse Sampling for Counting, Method 2 (page 16)
• 3.11 - Recalling a Piece Weight (page 17)
• 3.12 - Clearing a Piece Weight (page 17)
• 3.13 - Recalling a Tare Weight (page 17)
• 3.14 - Clearing a Tare Weight (page 17)
• 3.15 - Using the CLEAR Key to Clear Numeric Entries (page 17)
• 3.16 - Using the BASE Key (page 18)
3.1 Unpacking the Scale
Unpack the PC-905 and remove the shipping materials from around the
scale.
3.2 Installing the Scale
Place the scale on a stable, level surface out of the way of air currents. Use
the adjustable feet to level the scale. Be sure the scale does not rock back
and forth. Lock the feet in position with the knurled locking rings.
The PC-905 comes with the AC transformer in place beneath the scale. Plug
the unit into a grounded 120VAC source.
If the battery option is installed, charge the unit for 16 hours before using the
scale for the first time.
Scale Setup and Operation
3