18
PC-905 Counting Scale User Instructions
Scale Setup and Operation
3.16 Using the BASE Key
Press the
BASE
key to switch between using the local scale and a remote
scale base. This assumes you have a remote base option installed.
If Automatic Base Switching is enabled (see the
Service Manual
for
instructions on enabling this function), use the local base for all sampling and
when the sampling is done, the remote base becomes the active scale
automatically.
If you do not have auto base switching enabled, you can do your sampling
on the local base, press the
BASE
key and place items on the remote scale
for counting.
You can tell which scale is active by the
LOCAL
and
REMOTE
annunciators
on the display.
Below is an example of using the
BASE
key with bulk sampling and auto
base switching enabled:
1.
With the remote option installed and the scale in weight mode, press
the
SAMPLE
key. . .
You can press the
SAMPLE
key
again to change the sample size.
ADD XXX
, the sample size, is displayed. See the note at left.
2.
Place the indicated (
XXX
) number of parts on the scale. . .
The scale calculates the piece weight, displays the count, the
REMOTE
annunciator lights and the remote scale becomes the
active scale.
3.
Place the items to be counted on the remote scale. . .
Count is displayed.
Additional notes:
You can tare containers on the remote scale by using the
TARE
key.
Sampling is always done on the local scale.
Summary of Contents for PC-905
