04/02 Rev. 2.15-01
MANUAL
Setup, Operation, Service, page 4
TTX 207 – Da Capo
Connections
All connectors are located at the rear side.
A Centronics or alternatively a serial V.24/DB 25 (RS232) interface interface
is integrated.
Before connecting/disconnecting the interface cable and the stacker switch
„OFF“ all devices.
Only devices may connected to the interface and stacker connector which
are approved to ICE 950 and VDE 0805 and are in compliance to SELV.
Fig. 1: Connections on the printer backside.
(not supported)
