04/02 Rev. 2.15-01
MANUAL
Setup, Operation, Service, page 14
TTX 207 – Da Capo
Technical Specifications
Print Technologie
Thermal Direct Print with Thickfilm Printhead
Resolution
8 Dots/mm - Standard
Print Width
104 mm
Emulation
EasyPlug
Print Speed
100 mm/s (approx. 4“/s)
Interface
Parallel, optional serial
Memory
1 MB dynamic RAM
Print Ratio
100% 1:1, Batch and mixed version
Gap recognition /
gap dimensions
Self-initializing gap sensor with 11mm variable adjusting range
– Length of punch: 0.8 to 14mm, width: min. 4mm
– Optional reflex marking sensor with 11mm variable adjusting range; mar-
ker length: 4mm, width: min. 10mm
Fonts
17 Fonts inclusive OCR-A and OCR-B
Character modifica-
tion
Scaling in X/Y-direction up to factor 8, rotation 90, 180, 270 degrees
Bar codes
EAN 8 und 13 mit Add-On 2 und 5, UPC-A, UPC-E,
Code 39, Code 93, Code ITF, Codabar, Code 128,
Code 2/5M, Code 2/5I, Code 2/5 5-Strich, EAN 128
Bar code modifi-
cation
Scaling in X-direction up to factor 8, in Y-direction from 1 to 100mm, rotation
90, 180, 270 degrees
Graphics
Download is supported
Graphics modifi-
cation
Scaling in X/Y-direction up to factor 8, rotation 90, 180, 270 Grad
Material Stock
Width: 110 mm, Inner diameter: 1 1/2“, 2“, 3“, 4“
Outer diameter: 190mm
Media Material
Self adhesive, plastics and card boards compatable to Thermal direct print
with a weight of 70 up to 240gr/sqm and a thickness of 0.05 up to 0.3 mm.
Label Size
Width: 19.1 to 127 mm, length: 5 to ca. 700 mm
Mains voltage
115 / 230 V, +/-10%
