04/02 Rev. 2.15-01
MANUAL
Setup, Operation, Service, page 11
TTX 207 – Da Capo
Trouble shooting
Errors during operation are indicated by means of the red LED at the opera-
tion panel.
By pressing the FEED key an error code may be called off via the yellow LED
in order to recogneize the kind of error.
After correction of the error the error indication has to be confirmed by pres-
sing the ON/OFF key. After switching the printer to ONLINE mode the job will
be continued. Partly printed labels will be repeated.
LED-Code
Error
Measure
•
•
•
– –
Pressing lever open
Close lever, punch is re-in-
itialized, job will be continu-
ed.
•
•
–
•
•
Material end
Insert material and check
position of gap sensor,
punch is re-initialized, job
will be continued.
•
•
•
•
•
NOVRAM read error
Call service technician
•
–
•
•
•
NOVRAM write error
Call service technician
•
•
•
–
•
No gap found on 3 or more
labels
1. Check gap definition in
printing mask.
2. Check whether correct
material is inserted.
3. Check whether light barri-
er is cleaned.
4. Check material guide and
position of light barrier.
•
•
– –
•
RS232 - Transmission Error Check adjustments: baud
rate, stop bits, no. of data
bits and correct them at
computer and/or printer if
neccessary. Check trans-
mitting line and external in-
fluences.
•
–
•
–
•
RS 232 - Reception Buffer
overflow
Check synchronisation of
data transmitting and cor-
rect it at computer and/or
printer if neccessary.
•
– – –
•
RS232 - Reception error pa-
rity
Check parity adjustment
and correct it at computer
and/or printer if neccessary.
•
•
•
•
–
Memory Allocation Error
Call service technician
•
–
•
•
–
Font Allocation Error
Call service technician
•
•
–
•
–
Unknown Interrupt
Call service technician
Tab. 1: Blink codes of the yellow LED (
•
= short lighting up, – = long lighting up).
