04/02 Rev. 2.15-01
MANUAL
Setup, Operation, Service, page 10
TTX 207 – Da Capo
Label material
The printer is designed for thermal direct printing. The label material should
be of low abrasive behaviour of the surface structure and low start tempera-
ture for the colour development.
If the material is extremely abrasive, the printhead is faster worn as usual.
Similar conditions prevail with high start temperature. Material and printhead
require a longer cooling down period, the printing quality is more critical and
the printhead is faster worn as on a normal rate.
Fig. 5: Specifications for label material.
