Avery Dennison LOKPRINT 676, User Manual

Page: 44 / 79

38
• •• •
Maintenance User Manual Model 676 LOKPRINT®
C) Using the left (<YES) or right (NO>) arrow key set the HEAD
CATEGORY as called out in the PRINTHEAD CATEGORY
CHART below.
D) Press the ENTER key to enter the value. The printer must be turned
off and back on for the change to take effect.
PRINTHEAD CATEGORY CHART
MEAN
RESISTANCE
obtained from
printhead label
PRINTHEAD
CATEGORY
entered in front panel
for print station
containing head
1190 – 1243 1
1244 - 1295 2
1296 – 1348 3
1349 - 1400 4
1401 – 1453 5
1454 - 1505 6
1506 – 1558 7
1559 – 1610 8
13) As a final test of the print head installation, run a test pattern to check the print
quality. You should observe an even grid of chevrons. If you do not see such a
grid, make sure both the front and the back printheads are moved all the way to
the right.