Avery Dennison LOKPRINT 676, User Manual

Page: 36 / 79

30
• •• •
Control Panel Operation User Manual Model 676 LOKPRINT®
D E F A U L T T R A N S F E R T Y P E 1
V A L U E : X X X N E W V A L U E : Y Y Y
Station 1 not used.
D E F A U L T T R A N S F E R T Y P E 2
V A L U E : X X X N E W V A L U E : Y Y Y
This screen follows the DEFAULT TRANSFER TYPE1 screen IF emulation mode is
something other than none. This screen allows the DEFAULT TRANSFER TYPE to
be changed. This transfer type is used when the printer is in 630 or 650 emulation
mode for print station 2. The 630 and 650 do not send valid
676
transfer types in
their PCL code. This default is used for those formats. Use the <YES and NO> keys
change the number value at the cursor position. Pressing ENTER will update the
current position with the selection and move the cursor to the next position. All three
positions must be entered. (I.e. 053 for type 53). After ENTER is pressed on the last
digit the TRANSFER TYPE on the top line will be updated. Pressing the MODE /
Down Arrow key will take the user to the next screen. Pressing the EXIT / Up Arrow
key will take the user back to the "HOME" screen.
D E F A U L T T R A N S F E R T Y P E 3
V A L U E : X X X N E W V A L U E : Y Y Y
This screen follows the DEFAULT TRANSFER TYPE2 screen IF emulation mode is
something other than none. This screen allows the DEFAULT TRANSFER TYPE to
be changed. This transfer type is used when the printer is in 630 or 650 emulation
mode for print station 3. The 630 and 650 do not send valid
676 transfer types in
their PCL code. This default is used for those formats. Use the <YES and NO> keys
change the number value at the cursor position. Pressing ENTER will update the
current position with the selection and move the cursor to the next position. All three
positions must be entered. (I.e. 053 for type 53). After ENTER is pressed on the last
digit the TRANSFER TYPE on the top line will be updated. Pressing the MODE /
Down Arrow key will take the user to the next screen. Pressing the EXIT / Up Arrow
key will take the user back to the "HOME" screen.
L A N G U A G E : X X X X X X
N E W L A N G U A G E : Y Y Y Y Y Y
This screen follows the "DEFAULT TRANSFER TYPE" screen. This screen allows
the front panel display language to be changed. Use the <YES and NO> keys to
move between the supported languages on the pr1nter. Any number of front panel
languages can be stored on the Flash Disk Module (dependent on available space). If
no additional languages other than the default are available on the printer XXXXXX
and YYYYYY will be the same value. Pressing ENTER will update the display
language with the selection. Pressing the MODE
/
Down Arrow key will take the
user to the "PROTOCOL" screen. Pressing the EXIT
/
Up Arrow key will take the
user back to the "HOME" screen.
Warning: Mis-matched communication protocols may result in the inability to
communicate with the printer and / or loss of data.