93
6
O
PERATIONAL
MALFUNCTIONS
6.2 E
RROR
MESSAGES
ALS
350
450
E__7
Photoelectric sensor in the loop
space does not detect the loop for-
mation; label stop sensor does not
detect the labels and problem with
the rewind unit.
Refer to E__1, E__2, and E__4.
E_10
Error at applicator
When using an EP applicator:
The applicator must be checked by servicing techni-
cians.
E_11
Many products are not labelled. The
number of unlabelled products is
greater than the amount set in the
MLAB function.
The distance between the products on the conveyor
belt is insufficient:
£
Increase the product distance.
£
For circumferential labelling: Increase the rotational
speed.
The product triggers several start signals, caused by
reflections, for example:
£
Adjust the product length (PRDL function).
When using a printer, the printing time is too long:
£
If possible, decrease the printer dwell time (PDWT
function).
£
Start printing process before label stop (PDT func-
tion).
Several labels are missing from the label ribbon:
£
Replace label roll
or
£
Increase value for MLAB, if possible.
Erroneous settings in the extended menu:
£
Check the POS2 and POS3 settings.
E_12
Invalid setting value Factory settings
are activated, see
Appendix
.
A serious memory error has occurred:
– The control system needs to be reconfigured by a
servicing technician or the customer service; refer
to the service guide.
E_13
Label roll is completely consumed.
Labels are no longer detected at the
label stop sensor.
£
Replace label roll.
Message
Description
Possible causes and remedies
