background image

 2

Thank you very much for the purchase of our product. The manual booklet contains all operation information 

you may require to install properly and operate the screen. We hope it will help you  to get the most performance and 
enjoyment of your new screen. Enjoy time with the 

Avers Screens 

product.

SAFETY INFORMATION

NOTICE: Important safety information.
 
Follow the instructions described in the operating manual for safety reasons. After reading the manual, please store 
it in a safe place just in case you need it in the future.

NOTICE: THE DEVICE HAVE TO BE EARTHED.

WARNING:
1) Disconnect the device from the power supply if it will not be used within longer period of time.
2) Do not open the casing of the device in order to avoid possible electric shock. There are not any user operated 
parts inside the case of the screen. All service work can be done by Avers Authorized Service Center personnel 
only.
3) Do not remove the Ground pin from the power outlet neither connect the device to the socket without the Ground 
pin. If you can't put the plug to the power outlet, please ask electrician for assistance.

Dear Customer,

Table of contents: 

 

1. Safety rules

       

1.1. Declaration of Conformity CE

2. Product specification

       

2.1. Contents of package

       

2.2. Technical data

3. Screen installation

       

3.1. Installation directions

       

3.2. Ceiling installation

      

3.3. Wall installation
3.4. Electric installation
3.5. Screen programming
3.6. +DELTA remote control system programming

4. Screen operation

5. Warranty conditions

4.1 
4.2 
4.3 

Manual operation
Screen maintenance
Before asking for service

Summary of Contents for Cumulus X Tension













Reviews: